Recent Mold Remediation Posts
Where Do Common Types of Mold Tend To Grow?
Stachybotrys Atra, also known as black mold.
Common Places For Mold Growth
Mold may grow wherever moisture and food sources are present. Fungus feeds off of organic material such as cellulose, which is present in many building materials and contents. Learn more about common places for mold growth and the genera that are frequently found in each location.
Any condensation that accumulates in an air conditioning unit can support the growth of mold. Several types of fungi thrive in HVAC units and ductwork:
Ventilation systems can spread spores throughout a residence. Contact a specialized cleaning service if you suspect that mold is growing in an HVAC unit or ductwork.
Bathrooms and Sinks
Mildew may be an early indication of an elevated risk of mold growth in a bathroom or under a sink. Take measures to promote proper cleaning and ventilation. If conditions remain conducive to the growth of mold, look out for fuzzy brown or green alternaria or black and brown spots of cladosporium.
Refrigerator Drip Pan
Spilled food and collected condensation may allow genera such as aspergillus, cladosporium or penicillium to thrive in a drip pan. Clean out this pan on a regular basis or after major spills to prevent undesirable odors and mold.
Near Water Damage
Many types of mold flourish after a leak or pipe burst. Unless a homeowner takes measures to mitigate damage, several genera may develop within a matter of days:
It is almost impossible for a non-professional to identify the genus or species of mold. Hire an environmental hygienist or mold specialist to conduct professional testing.
These are some of the most common locations for mold growth in a residence. The presence of moisture or high humidity levels are the most important factors. If a mold problem develops at a residence in Dunwoody, GA, contact a company that provides testing and remediation services.
Fungal Fraternal Twins: The Differences Between Mold and Mildew
Mold can be a much larger infestation.
Difference Between Mold And Mildew
Mold and mildew, while similar are not the same and are resolved in drastically different ways. For instance, mold damage may require a specialist, but any number of household cleaners likely remedies mildew. While these fraternal fungi are related, it is important to Know their differences to reduce your level of anxiety should you come across either.
1. Prominence Versus Subtleness
Mold is a little bit of a trickster, when it appears, it may only show up in blotches on walls or surfaces, but it has likely been growing for some time in wall cavities and crawlspaces. Mildew growth, alternatively, is considered a surface fungus, meaning that it is what you see.
2. Bold Black and Green Versus Lighter Gray and White
While mold damage and mold growth are distinctive for many reasons, one is the color of the fungus. Mold can be a multitude of colors, depending on the type of mold, but the most common colors are black and green. Mildew, however, is not as colorful, only showing up in gray and white.
3. Fuzzy Versus Smooth
When staring at a mold specimen and a mildew sample, you will likely notice the apparent texture difference. Mold is almost fuzzy while mildew is flat. Also, mildew will resemble a stain more than a growth.
4. Infestation Versus Nuisance
Mildew can be considered a nuisance, something that is annoying but easy to clean and remove. Mold, however, can be a part of a larger infestation that has set up base camp in your walls and crawlspaces. If you find mold, it may be wise to contact a mold remediation specialist in the Dunwoody, GA , area to help.
Mold damage can be expensive to remedy, but just because you find a discolored growth behind a kitchen cabinet does not mean you are dealing with mold. Mold and mildew, while similar, are vastly different, so know which fungus you are dealing with before you panic.
How to Remediate Microbial Contamination Caused By Mold Damage in DeKalb Homes
Mold can be visible or hidden. Call SERVPRO to investigate and remediate.
SERVPRO's Three Steps to Combating Mold Damage
If evidence of mold and microbial contamination is present in a home, it is time to call the experts. The existence of mold is a serious thing because it spreads quickly and degrades structural materials. The tricky thing about it is that the spores are very tough to beat.
The first option is a direct and physical removal of the affected items. Alternatively, they can be rendered neutral, so that the spores are unable to spread further. It is not possible to tackle mold spores with regular household cleaners, so it is important to consult a company like SERVPRO. We have lots of experience dealing with mold damage in DeKalb homes.
Keep reading to find out how we remediate mold and prevent it from spreading throughout family homes in this region.
Step One: Inspect the Area
Successful repairs are not possible until the source of the water gets identified and eliminated. Mold thrives in moist conditions, so there is always an underlying problem with excess water somewhere in the house.
If a pipe has burst, for example, it needs fixing and the affected area needs a thorough drying. Concealed leaks are the hardest to deal with because they present access problems. In some cases, a small section of plasterboard requires removal, so that the technicians can place dehumidifiers and fans inside wall cavities.
Step Two: Cleaning with Biocides
The most efficient way to handle moldy materials is to lift them up and out of the house. We can do this in some cases. Often, smaller non-porous items get removed for external cleaning. Or, the SERVPRO team sets up a containment chamber, where cleaning is carried out.
The aim, in both situations, is to take the mold away from unaffected areas, so that they do not become contaminated with microbes. Similarly, HEPA vacuums are a common tool, because they transfer the spores to a contained receptacle.
However, physical interventions are not always possible. When walls, floors, and ceilings become compromised, biocides are used to neutralize the mold spores. We only resort to strong chemicals if there is no other option for restoration, as they require all residents to vacate the building for a set period.
Step Three: Post Remediation Tests
SERVPRO does not leave the site until the technicians are confident that the spread of the mold is no longer a danger. Affected walls and other surfaces may need to be sealed and repainted to cover stains. Our team is happy to handle this part of the process too. The last step is to test the moisture levels in the home and ensure that the current conditions do not allow for further growth.
At SERVPRO of NW DeKalb/Dunwoody/Brookhaven, mold is a serious business. We have spent years tackling the problem for residential customers, and our methods are highly effective. We can help you rescue your property from the grip of mold damage. Call us 24/7 at (770) 396-3883.
Signature Indicators of Mold Damage in Your Dekalb Home
Mold in a Dekalb Property? Call SERVPRO for Remediation
Dekalb Restoration for Mold After a SERVPRO Inspection
Detecting mold can be one of the most challenging steps toward removing it from your home, as many of the worst mold infestations occur behind walls or below floors in inaccessible areas. However, mold thankfully has some important tells that can indicate its presence in the home. Although individually any of these observations may be unrelated to any possible mold growth in the building, they are still key indicators that may be strong warning signs both in tandem with each other or on their own. Without the advanced detection equipment used by SERVPRO inspectors, these signs are your best bet for finding mold growth.
Foul and Musty Odors
If an area of your home has suddenly been affected by unusual and strong odors, this may be a sign of mold damage in Dekalb. Some varieties of mold emit a strong, musty smell, but others may create other unpleasant odors. If the scent is stronger closer to a wall, floor, or ceiling, there may be a mold colony growing behind that surface. If the scent is strong enough, this may be reason enough to call SERVPRO and find out how serious the damage is.
Rotting Elsewhere in the Home
Although this may be harder to identify, quickness for food and materials to rot elsewhere in the home may be a sign of a large mold colony somewhere in the building. These colonies produce exceedingly high volumes of spores, which seek out surfaces to grow on and consume. If curtains, carpets, clothing, or even food is starting to decompose at an unusual rate, there may already be serious mold damage present.
SERVPRO of NW DeKalb / Dunwoody / Brookhaven is a local authority and resource for combatting mold damage. If you fear a mold infestation has taken root in your home, call us at (770) 396-3883.
3 Stages of Food Mold
Drying moisture fans in Dunwoody, GA
Keeping your Dunwoody,GA, home clean is probably a high priority for you. The kitchen can be especially challenging, especially when it comes to keeping your refrigerated and countertop foods fresh. One problem you may face is bread mold, which can invade almost any type of yeast-based product. While it might seem that food mold grows overnight, there are actually three stages it goes through before it becomes visible.
1. Mold Spores Lie Dormant
Mold spores are present on many surfaces, even if you cannot see them. This is also true of many foods, including fruit, meat and bakery products. These spores are harmless on their own and may be washed away or destroyed during the cooking process. Once the food sits for more than a few days, the present spores begin to take effect.
As food ages, the mold spores on its surface will begin to grow and germinate. Fridge mold can develop on almost any food, even if it is in an airtight container. When food sits, the mold spores start to consume its nutrients and then multiply and grow.
3. Visible Mold
Once the mold spores start to grow, they can be seen by the naked eye. They usually appear as white or light green spots. Bread mold of this type can be especially common, especially during humid weather. If the mold problem becomes severe, it can spread quickly, so you may want to consider calling in a mold damage and cleanup service to inspect your kitchen for infestation. Mold technicians may be able to offer you tips on how to avoid future fungus growth and prevent your fridge from becoming the ideal environment for mold to thrive.
Battling food spoilage, from bread mold to fuzzy leftovers, can be a challenge. However, when you know how mold grows and why, you may be able to slow or prevent the process and keep your Dunwoody,GA, home cleaner.
5 Types of Mold Found in Homes
No type of mold growth is desirable.
5 Types of Mold Found in Homes
Mold comes in many forms, textures and colors. Your home in Dunwoody, GA, is susceptible to mold growth when there is excess moisture in the air or on surfaces. Many types of mold can be found in homes, and every type of mold is attracted to wet areas. When mold begins to grow, you must have the problem remedied by professionals.
Types of Mold
Almost any type of mold can set up shop in your home if it finds its way in. Some types, however, are more common in homes than others:
• Alternaria – often brought in on clothing, hair or pets from outside
• Aspergillus – found in air ducts or air conditioning systems
• Cladosporium – attracted to items teeming with organic matter such as plants, mattresses or clothing
• Penicillium – found on decaying vegetation and causes food to spoil
• Stachybotrys – found in areas with water damage, such as floorboards or walls
Ways To Stop Mold
Of course, the best solution for mold growth is to prevent it from happening in the first place. If you experience high humidity in your home, consider purchasing a dehumidifier. Have leaks repaired quickly so that they don’t cause water damage that attracts spores from the air. Make sure your bathroom, kitchen and laundry room are well ventilated.
Any time you do have mold growing in your home, however, you need to call mold remediation specialists. These certified professionals are trained not only to combat mold but also to resolve the problem that allowed it to flourish. They know how to contain the mold so that it doesn’t spread any further, and they have the appropriate equipment to remediate and restore moldy areas.
No type of mold growth is desirable. Some types may require different remedies than others. The only way to make sure your mold problem is resolved efficiently and thoroughly is to hire experienced professionals who know what they are doing. For more information, visit http://www.SERVPROnwdekalbdunwoodybrookhaven.com/.
3 Strategies for Reducing Mold Spores in Your Commercial Facility
Protecting your DeKalb, GA, commercial building from damaging substances may help you save on repair costs and increase its value over time. Mold prevention can be especially important, as fungus could have a devastating impact on building materials and spread quickly. However, from carpet cleaning to preventing excess moisture, there are several strategies you can employ to reduce the number of mold spores that enter your commercial facility.
1. Regular Carpet Maintenance
While fungi spores are usually present in the air, they are attracted to moisture and dampness and will multiply in this type of environment. Carpeting can be especially attractive to spores because the fibers can trap and hold wetness, especially on runners or mats meant to handle foot traffic. Regular carpet cleaning with a vacuum that uses a HEPA filter can trap and eliminate spores and prevent mold growth in the material and the padding.
2. Keep the Building Dry
High humidity levels and excess moisture inside your building can attract fungi spores and contribute to unchecked growth and spreading. Hidden leaks, inefficient water lines and water damage from former floods can all create an ideal breeding environment for mold. Having a flood remediation and restoration company inspect your building for hidden water issues can discourage spores from multiplying.
3. HVAC Cleaning
Mold spores can travel throughout your building through its heating, ventilation and air conditioning system and even breed there if moisture is present. Fungi may also feed on dust inside your ductwork, which means more spores might be released into your facility each time you run your air conditioner. Having your ducts cleaned once a year may prevent these mold problems and contribute to cleaner air for your employees and customers.
Protecting your DeKalb, GA, commercial facility from the damaging mold can be challenging, especially if it is located in a low-lying area that is prone to moisture and humidity. However, carpet cleaning, HVAC maintenance, and other regular cleaning can reduce the number of fungi spores inside your business. For more information, visit http://www.SERVPROnwdekalbdunwoodybrookhaven.com/.
Personal Safety Equipment Used in Mold Remediation
The mold on the wall in the picture was the result of moisture left over from a large water loss the owner of this home experienced.
As a homeowner in Dunwoody, GA you may try to take on a lot of home improvement tasks on your own. When you have to make repairs to the dishwasher or maintain your lawn, you take pride in doing everything yourself. When it comes to mold damage, however, the task may not be so simple. Not only do mold remediation experts have tons of cleaning equipment and technical know-how at their disposal, they also have the personal equipment needed to take care of the fungus safely.
• Face Masks: A face mask can protect your respiratory system because it stops dusts and mold from getting into your lungs. To be really effective, the masks should be filtering to ensure the tiny particles don't make their way through.
• Hard Hats: Depending on the level of the remediation, large chunks of drywall may have to be removed from the walls and ceilings. Hard hats can protect a person from overhead impacts. However, this device can offer even more protection. Wires may become exposed after removing certain parts of the drywall, so the hats can serve to protect from electrical threats as well as bludgeoning threats.
• Charcoal Filters: When bad smells permeate a space, face masks with charcoal-impregnated filters may be needed. These special filters help keep the odors at bay.
• Footwear: Mold spores can ride around on clothes and shoes, so it is not surprising that shoe coverings may be needed to stop the spread of the mold. These coverings are usually disposable.
• Gloves: Gloves may need to be heavy-duty leather or simple disposable gloves depending on the level of the mold damage and the type of cleanup. Either way, this personal protective equipment can reduce scratches to the hands.
• Eye Wear: Safety goggles with shields on all sides of the eyes are a necessary part of mold remediation. These glasses protect eyes from irritants.
Buying all of the needed equipment, such as face masks with respirators and special eyewear, can cost a lot. For many homeowners, it is easier and safer to trust the cleanup to professionals. Visit http://www.SERVPROnwdekalbdunwoodybrookhaven.com for more information on mold.
3 Ways You Can Keep Spores From Building Up in Your Structure
Mold problems can sneak up on you fast. There are a lot of nooks and crannies in your commercial building that could be the perfect environment for mold spores to start developing. Like many other business owners in Doraville, Georgia, you want to keep your structure free from the plagues of mold. That's why you're intent on moisture control and HVAC and carpet cleaning. While there's no guarantee you'll be able to stop mold from ever being a problem, you can take these three steps to try to prevent the issue.
1. Hire a professional cleaner. Regular, thorough cleaning of your facility is one great way to stop spores from growing. It's important your air ducts and HVAC system are cleaned to help remove extra moisture and dust, which can encourage the growth of mold. You should also make sure your building has regular carpet cleaning to get rid of any spores that might be clinging to the fabric.
2. Use HEPA vacuums. Regular vacuums suck up dirt and dust, but they may allow micron-sized particles, like mold spores, to re-enter the air of your building. A HEPA vacuum, on the other hand, has high-efficiency filters that can trap these miniscule airborne particles to ensure they're not getting back into your environment.
3. Put rugs by the entrances. Rain, snow and other outdoor precipitation can actually lead to an increased level of moisture in your facility. If an employee tracks muddy wetness through your building, he or she could be leaving a nice trail for mold to start growing. Similarly, people can track small spores in on their shoes. If you have rugs at every entrance, you're encouraging anyone who comes into your building to leave foreign water and particles in a central location.
Carpet cleaning, commercialized vacuum use and rug incorporation can help stop mold problems before they start. Mold spores can make their way into your building through a lot of sources, so you need to be vigilant in your cleaning.
Visit http://www.SERVPROnwdekalbdunwoodybrookhaven.com for more on mold remediation.
You’ve Found Mold in Your Home. Now What?
You’ve Found Mold in Your Home. Now What?
It’s a story most homeowners in DeKalb, GA have heard before. A musty smell coming from under the sink in the bathroom leads to a horrifying revelation: a large spot of black mold sitting beneath the pipes. How could this happen? How to get rid of it? Who do I call? These are questions that often run through a homeowner’s mind upon discovering black mold in their home. Here are a few tips for homeowners to avoid a friendly environment for mold and what to do should you discover it in your home.
Humid, Moist Environments
Living in a humid region, your risk for black mold is already higher than in many other places. This is because mold thrives on moisture. That’s not to say it’s the only cause, however. Mold exists in some form or another nearly everywhere, usually as small spores in the air. It may have chosen a moist environment to grow, but it very well could have entered your home through an open window or door, or even on your clothes. That being said, it’s important to keep your kitchens, bathrooms, laundry rooms, and basements as dry as possible, since those areas typically experience moisture problems and are where black mold is most commonly found.
Storm and Water Damage
If you’ve recently experienced a severe storm that brought water into your home, you should take action immediately. Not only can water damage severely damage the structural integrity of your home, it can cultivate an ideal environment for black mold if not treated immediately. In such events, your first course of action should be to call your local disaster restoration professional immediately. They can restore your home to its original state and prevent mold from growing in the first place.
If you have found black mold anywhere in your home, don’t try to handle it yourself. Your local restoration professional can also conduct mold cleanup procedures. Visit http://www.SERVPROnwdekalbdunwoodybrookhaven.com for more information on mold.
Why Is Mold Growing In My House?
Why Is Mold Growing In My House?
The good news is that recognizing the problem is half the battle. Now you’ll just need to solve the problem and all will be right in your world. Black mold can be an insidious enemy, growing and flourishing without the occupants of the space even realizing there’s an issue. Mold cleanup can be simple and fast with the right contractor, and preventing the re-infestation of mold can be as simple as ensuring that you handle moisture problems quickly and correctly.
Common Moisture Problems That Lead to Mold
There are several extremely common problems that often result in a mold infestation. These are just a few of the usual suspects:
Broken supply lines
Flooding in a space leaves you with obvious water damage that can develop into a mold problem if your space is not dehumidified properly. Air-drying is usually not enough to ensure that the materials used to construct your space and the contents of your property have dried from the inside out. A damp interior in your drywall or other materials can lead to mold growth quickly. Your mold cleanup should include proper dehumidification of all of the contents of your property.
High humidity is an unseen danger. Humidity higher than 45 percent in an indoor space can cause mold growth even when there’s been no catastrophic event. Keep your humidity low indoors to protect your property at all times.
Broken pipes and broken supply lines can lead to a slow leak that isn’t immediately evident. That slow leak can cause a moisture problem in your space. Often that moisture is behind drywall inside of walls, or under carpeting or flooring in a carpet pad or even the subfloor. That hidden water creates an ideal environment for black mold to flourish.
Fortunately, a qualified contractor can find and correct those problems with no fuss, making mold cleanup a breeze. They’ll be able to properly dehumidify your space, locate and repair or replace porous materials that have become water damaged, and remediate your black mold growth to keep it from becoming a problem.
Visit http://www.SERVPROnwdekalbdunwoodybrookhaven.com for more information on mold.
Mold Damage and Remediation Explained
Mold Damage and Remediation Explained
It occurs when an area in the house is kept under wet conditions for an extended time. If a place or wood develops moisture, the remedy is to destroy the material or cut off the affected area. Mold starts to grow indoors when its spores land on a moist surface thus developing damage.
It is the process of removing mold from an affected area. Mold removal is a painstaking activity, it's a slow one and quite costly and requires a person who knows how to carry out the operation professionally. A person involved in mold removal must wear protective gear because some people if they come in contact with it an allergic reaction may occur. In mold removal, all moist areas must be cleaned and dried completely because a recurrence is likely if dampness persists.
Mold remediation is an activity where steps are taken to prevent any further mold manifestation in the house or around the compound. Remediation of mold requires a person first to identify the mold, assemble materials needed for mold removal, prepare work area by removing any valuable personal belongings and if not movable they should be covered. Further, in remediation, protective gear should be worn, materials that mold cannot be removed to be removed and destroyed to prevent the spreading of spores. Fungicide to be applied after mold removal for remediation to be successful.
Mitigation is measures taken into account to prevent mold damage from happening. When clearing mold damage in an enclosed area, air should be prevented from going outside since this will spread mold spore to other places including the same area that is being cleaned. During mitigation, protective wear is advised. Mitigation helps in putting mold damage levels to their minimum.
Fungus belongs to a group of organisms called eukaryotic. The fungus develops on moist or decomposing areas; it is an agent of decomposing too. The fungus can be dispersed through air and water. The fungus is small in structure and cannot be seen by the naked eyes thus their mode of dispersal.
Mildew has similar characteristics like fungus, but the distinguishing factor is its color which is white. Mildew is an early stage of mold and starts to grow in 48 hours when in the right conditions. Mildew can easily be cleaned by scrubbing since they are easily identifiable as compared to fungi. Mildew causes damage to crops and plants. Mildew also changes its color as it grows older.
Mold in Home
Mold in home can be detected through odor or smell. Signs of growth are seen around the where dampness is common, and action should be taken immediately to prevent further growth. If a mold in home happens, it can be traced to a water problem if it has been spilling for a long time. The water problem should be repaired since a moist area is where mold thrives.
Commercial mold damage
Commercial mold damage is the damage by a mold growth in a business environment. It affects both equipment and furniture. Commercial mold damage also affects floors and walls of a building. Commercial mold damage can cause structural damage to the business. Commercial mold damage occurs where there is no adequate ventilation thus fodder for mold growth behind walls.
Deodorization is a process of removing a bad smell from something or an area that is enclosed. Deodorization works well in an enclosed area. The method of deodorization required a professional to apply a deodorant because the quantity used is measured. Deodorization, in this case, is applicable when all the mold has been removed and the area dried well. All this is done in an enclosed area or maximum effect.
The smelly odor is smell emanating from a damp place or something that is rotting. If an area is exposed to water for a longer period, a smelly odor will be felt. Smelly odor can be minimized by applying a deodorizer and also cleaning the affected areas. Smelly odor if not controlled can be poisonous if inhaled for a long time.
Dry rot is decay of wood caused by fungi and the wood tends to be stiff. Dry rot can stay for a longer time if not exposed to moisture. Some dry rot can be dangerous and some are not dry rot can be removed by cutting off the affected area.
A restoration company is an organization that specializes in mold eradication. A restoration company has all the equipment and materials needed in eradicating mold. A restoration company also has the personnel trained to carry out mold cleaning. A restoration company has an open line that it can be reached at any time.
Black mold is an organism that is living. Dry mold can grow on dry wall, floor or carpet. Since black mold spores spread quickly all, moist places should be kept dry at all time. Black mold at home can be dangerous to inhale. If a black mold is spotted, a specialist should be called to clean it because of its toxic levels.
Mold growth can be accelerated by moist and a temperate condition. Mold growth can be controlled at an early stage if regular checks are conducted on moist areas. Mold growth can be accelerated by air or water if they are left unchecked. Mold growth can grow both at home and business areas.
Mold Growth Behind Wall
Mold can cause growth behind wall if the moist conditions are there. Mold growth behind wall can thrive because checking those areas is rare. Mold growth behind wall can be controlled by regularly checking those hidden areas and keep the dry.
Visit http://www.SERVPROnwdekalbdunwoodybrookhaven.com for more information on mold.
Suffering from Mold Damage in Your Chamblee Area Home? Get the Help You Deserve Today
Some mold is visible and some can lay hidden in your home. Call SERVPRO to investigate and remediate the infestation.
SERVPRO Technicians Quickly Find Hidden Mold in Your Home
Unless your property suffers exposure over extended periods of time, mold can be hard to spot. Small infected areas leave little evidence behind, making even the dank, musty odor emanations hard to locate.
Mold damage occurring in your Chamblee area home can happen quickly. However, it is not always obvious. Having water exposure in your home on Tuesday does not mean that your entire structure is exposed and clearly marked by large blotty mold colonies with highly visible signs by Thursday.
Most of the pictures depicting mold damage that you find on the internet show extended exposure. Something that you can avoid by contacting a quality mold remediation company, like SERVPRO, when you suspect mold problems are beginning to develop in your home.
Even if you are not 100% certain, SERVPRO technicians can perform an inspection of common areas found in your home where mold growth can occur, giving you peace of mind that you have done everything possible to protect your indoor living environment.
You can also gain some helpful knowledge from SERVPRO to prevent future contamination. We can help you get excessive humidity under control, preventing mold growth and protecting you further. If you want to obtain the best protection possible, you should ask about a variety of services that can help to avoid mold issues from ever becoming a problem.
While no one can guarantee to remove mold forever, some of these services make it possible to have the highest quality living environment for you and your family. Crawlspace or Basement encapsulation services, for instance, involve professional technicians adding vapor barriers to your crawlspaces that prevent ground moisture or inclement weather from affecting your indoor air quality.
Having professionals clean your ventilation system properly, or installing encapsulation often helps improve the efficiency of machinery, reduces costs, and enhances the quality of your entire living environment.
If you already have a mold issue in your home, we can contain the affected area, remove damaged materials, perform cleaning and disinfection services, along with any repairs necessary to return your home to normal and get things under control.
Give SERVPRO of NW DeKalb / Dunwoody / Brookhaven an opportunity to address your concerns, giving you the help you deserve, and getting mold contamination under control on your property, today. (770) 396-3883
For more information regarding Chamblee, click here