Properly Snaking a Clogged Pipe
When a drain or pipe becomes clogged sufficiently that a dose of drain cleaner does not do the trick, it may be that a plumbing auger, or snake, in needed to break up the blockage. Snaking a drain may be intimidating to the average person, but in many cases a simple tool from the department or home improvement store may do the trick.
How To Use a Snake
There are just a few tips to using an auger that can help you avoid worsening the clog or making an unnecessary mess. Consider the following:
- Push the end of the auger into the drain until you feel it make contact with the blockage.
- Turn the crank while offering some resistance against the clog until you feel it begin to give way.
- Withdraw the snake – you may need to reverse the cranking direction. You will then see whether you pushed the clog on down the drain or whether it comes out on the end of the auger.
- Try running some water into the drain to see if it is draining properly. If not, repeat the process.
When to Call a Professional
If the pipe is still stopped up, call a plumber in Gainsborough, GA to bring their commercial auger. They will check whether there is more going on. A plumber knows when to stop snaking in order to avoid a pipe break.
In the event that the toilet is clogged, and it overflows or backs up, it can create a sewage disaster. Even a small flood from a toilet can expose your home to contaminants and bacteria, and you would be safest to call a cleaning and restoration specialist in Gainsborough, GA to ensure that all sewage and residual bacteria are completely cleaned.
Try snaking your clogged drain yourself, but if it doesn’t work or your do not have a snake, do not hesitate too long before calling in professional help.